You must connect the AC power cable in compliance with local standards and
requirements.
● The cable with the C7 straight female X2 connector only to the desktop devices
USG6510E, USG6510E-POE, USG6530E.
● The cable with the C13 straight female X2 connector and non-C14 straight male X1
connector applies to non-desktop-mounted scenarios.
● The cable with the C13 straight female X2 connector and C14 straight male X1
connector applies to non-desktop models in PDU installation scenarios.
4.6.3 DC Power Cable
4.6.3.1 DC Power Cable
Connection
A DC power cable is connected as follows:
● One end is connected to the matching DC power terminal on the DC power
module of the USG.
● The other end is connected to an external power source.
Appearance and Structure
The DC power cables include the RTN cable, and NEG (-48 V) cable. Both the RTN
and NEG (-48 V) power cables consist of the terminal blocks and cables, as shown
in Figure 4-186.
Figure 4-186 Appearance of the DC power cable
Cable Type
Color
NEG cable Blue
RTN cable Black
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 487
To Next Page
Loading...
