Huawei USG6000E Series - 4.5.2.5 SFP-FE-SX-MM1310

Item Value
Minimum Tx optical power [dBm] -15 dBm
Minimum extinction ratio [dB] 8.5 dB
Receiver Optical Characteristics
Rx sensitivity (AVG) [dBm] -32 dBm
Overload power (AVG) [dBm] -8 dBm
NOTE
BIDI optical modules must be used in pairs. For example, SFP-FE-LX-SM1550-BIDI must be
used with SFP-FE-LX-SM1310-BIDI.
4.5.2.5 SFP-FE-SX-MM1310
Table 4-262 SFP-FE-SX-MM1310 specications
Item Value
Basic Information
Module name SFP-FE-SX-MM1310
Part Number 02315233
Model SFP-FE-SX-MM1310
Form factor SFP
Application standard 100BASE-FX
Connector type LC
Optical ber type MMF
Working case temperature [°C(°F)] 0°C to 70°C (32°F to 158°F)
Transmission rate [bit/s] 100 Mbit/s
Target transmission distance [km] Multimode ber (50 μm or 62.5 μm
diameter): 2 km
Transmitter Optical Characteristics
Center wavelength [nm] 1310 nm
Maximum Tx optical power [dBm] -14.0 dBm
Minimum Tx optical power [dBm] -19.0 dBm
Minimum extinction ratio [dB] 10 dB
Receiver Optical Characteristics
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 438