Figure 5-24 Placing the USG with rubber feet on a workbench
----End
Follow-up Procedure
Verify the following after the installation:
● The USG is securely placed on the workbench.
● No object blocks the exhaust of the USG, and there is at least 10 cm of
distance between the USG and surrounding devices.
● There are no heavy objects on the USG.
5.4.2 Connecting a PGND Cable
Connecting the PGND cable of a USG6515E, USG6525E, USG6550E, USG6555E,
USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B,
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 544
To Next Page
Loading...
