● Reliably grounded.
● Clean, rm, and securely installed.
Accessories
Four rubber feet
Procedure
Step 1 Fix the rubber feet to the round notches at the bottom of the USG.
Install foot pads at the bottom of the USG to ensure smooth contact between the USG and
the workbench and avoid friction between the surface of the USG and the workbench.
Step 2 Place the USG on the workbench.
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 543
To Next Page
Loading...
