Huawei USG6000E Series - 4.5.2.3 SFP-FE-LX-SM1310-BIDI

Item Value
Form factor eSFP
Application standard STM-1
Connector type LC
Optical ber type SMF
Working case temperature [°C(°F)] 0°C to 70°C
Transmission rate [bit/s] 155Mbit/s
Target transmission distance [km] 80 km
Transmitter Optical Characteristics
Center wavelength [nm] 1550 nm
Maximum Tx optical power [dBm] 0 dBm
Minimum Tx optical power [dBm] -5 dBm
Minimum extinction ratio [dB] 10.5 dB
Receiver Optical Characteristics
Rx sensitivity (AVG) [dBm] -37 dBm
Overload power (AVG) [dBm] -10 dBm
4.5.2.3 SFP-FE-LX-SM1310-BIDI
Table 4-260 SFP-FE-LX-SM1310-BIDI specications
Item
Value
Basic Information
Module name SFP-FE-LX-SM1310-BIDI
Part Number 02315203
Model SFP-FE-LX-SM1310-BIDI
Form factor eSFP
Application standard 100BASE-BX
Connector type LC/PC
Optical ber type SMF
Working case temperature [°C(°F)] 0°C to 70°C
Transmission rate [bit/s] 155Mbit/s
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 436