Huawei USG6000E Series - Page 192

Port Connector Type Description Available
Components
2, they can form
an electrical
bypass link.By
default, the
combo port is
used as an
electrical port.
You can use the
combo enable
{ copper |
ber }
command to set
the working mode
of combo ports
according to
network
requirements.
NOTE
A bypass link can
be established only
when
GigabitEthernet0/0
/20 to
GigabitEthernet0/0
/23 work as
electrical ports.
Arrowheads show
the positions of
ports. A down
arrowhead
indicates a port at
the bottom, and
an up arrowhead
indicates a port at
the top.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 185