Huawei USG6000E Series - Page 200

Name Description
Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
Power module Provides power input and distribution for the device.
One power module is included in the standard
conguration. Two power modules can be congured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
Indicators and Buttons
Figure 4-79 Indicators and buttons on the USG6610E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
2. OFL
indicator
NOTE
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.
3. GE electrical
port indicator
4. Optical port
ACT indicator
5. Optical port
LINK indicator
6. MGMT port
indicator
7. RST button 8. OFL button - -
NO TE
● GE electrical interface indicators from left to right correspond to GE electrical interfaces
in ascending order. For example, the rst indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 193