Huawei USG6000E Series - Page 227

Indicators and Buttons
Figure 4-91 Indicators and buttons on the USG6620E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
2. OFL
indicator
NOTE
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.
3. GE electrical
port indicator
4. Optical port
ACT indicator
5. Optical port
LINK indicator
6. MGMT port
indicator
7. RST button 8. OFL button - -
NO TE
● GE electrical interface indicators from left to right correspond to GE electrical interfaces
in ascending order. For example, the
rst indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.
Table 4-93 Indicators on the USG6620E
Silkscreen
Name Color Status Description
PWR Power
indicator
Green Steady on The power
module works
properly.
- O The power
module is
faulty or the
power cable is
disconnected.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 220