Huawei USG6000E Series - Page 244

Silkscreen Name Color Status Description
- LINK indicator
for optical
ports
Green Steady on The link of
the port is
connected.
- O The link of
the port is
disconnected.
- Indicator for
MGMT port
Green Steady on The link of
the port is
connected.
Green Blink (12 Hz) Data is being
sent or
received
through the
port.
- O The link of
the port is
disconnected.
Table 4-100 Buttons on the USG6625E
Silkscreen
Name Description
RST RST button To restart the device,
press the RST button.
Ensure that the running
conguration is saved
before pressing the RST
button.
This button can enable
you to restore the
default settings with one
click. To be
specic, you
can hold down the RST
button for 5 seconds and
then release it to restore
the default settings and
restart the device.
OFL OFL button To remove a hard disk,
press and hold the OFL
button for four seconds
until the OFL indicator
turns on.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 237