Huawei USG6000E Series - Page 255

1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
2. OFL
indicator
NOTE
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.
2. GE electrical
port indicator
3. 10GE optical
port ACT
indicator
4. 10GE optical
port LINK
indicator
5. 40GE optical
port indicator
6. MGMT port
indicator
7. RST button 8. OFL button -
NO TE
● GE electrical interface indicators from left to right correspond to GE electrical interfaces
in ascending order. For example, the rst indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.
Table 4-105 Indicators on the USG6630E
Silkscreen
Name Color Status Description
PWR Power
indicator
Green Steady on The power
module works
properly.
- O The power
module is
faulty or the
power cable is
disconnected.
SYS System
indicator
Green Steady on The system is
being
powered on
or restarted.
Green Blink every
two seconds
(0.5 Hz)
The system is
running
normally.
Green Blink four
every second
(4 Hz)
The system is
starting.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 248