Huawei USG6000E Series - Page 271

Name Description
HDD/SSD slot Houses hard disks for storing log and report data.
Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
conguration and maintenance.
Protective ground
terminal
Connects the M4 OT terminal of a PGND cable to the
cabinet or the ground bar in the equipment room.
MAC label Uniquely identies the MAC address of the device,
which is required during network forwarding
conguration.
SN label Uniquely identies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
Power module Provides power input and distribution for the device.
Two power modules are included in the standard
conguration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
Indicators and Buttons
Figure 4-109 Indicators and buttons on the USG6635E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
2. OFL
indicator
3. GE electrical
port ACT
indicator
4. GE electrical
port LINK
indicator
5. 10GE optical
port ACT
indicator
6. 10GE optical
port LINK
indicator
7. 40GE optical
port indicator
8. MGMT port
indicator
9. RST button 10. OFL button
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 264