Huawei USG6000E Series - Page 286

Name Description
MAC label Uniquely identies the MAC address of the device,
which is required during network forwarding
conguration.
SN label Uniquely identies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
Fan module The fan module provides air ow for heat dissipation.
The power module supports hot-swapping and can be
replaced without interrupting device operation.
However, to prevent overheating, do not operate the
device without a functioning fan module for more than
one minute.
Power module Provides power input and distribution for the device.
Two power modules are included in the standard
conguration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
Indicators and Buttons
Figure 4-115 Indicators and buttons on the USG6650E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
2. OFL
indicator
NOTE
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.
2. GE electrical
port indicator
3. 10GE optical
port ACT
indicator
4. 10GE optical
port LINK
indicator
5. 40GE optical
port indicator
6. MGMT port
indicator
7. RST button 8. OFL button -
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 279