Huawei USG6000E Series - Page 320

Port Connector Type Description Available
Components
40GE optical ports
(0 to 3)
QSFP+ Four 40GE
Ethernet optical
ports, numbered
from 40GE0/0/0
to 40GE0/0/3.
By default, the
40GE0/0/2 to
40GE0/0/3 optical
ports mode are
disabled. To
enable this mode,
run the set device
port-cong-mode
40g-port enable
command.
40 Gbps QSFP+
Optical Module
HA ports(0 to 1) SFP+ Heartbeat
interfaces for hot
standby or the
cluster. Two
devices are
connected
through
independent links
to form hot
standby or the
cluster. numbered
from HA0/0/0 to
HA0/0/1.
10Gbps SFP+
Optical Modules
USB 3.0 port USB 3.0 Type A USB ports allow
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.
● USB ash drive
that complies
with USB 2.0
● USB ash drive
that complies
with USB 3.0
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 313