Huawei USG6000E Series - Page 37

Port Connector Type Description Available
Components
NOTE
● When the
device supplies
power to PDs,
the total power
consumption of
the PDs must
not exceed 60
W.
● Arrowheads
show the
positions of
ports. A down
arrowhead
indicates a port
at the bottom,
and an up
arrowhead
indicates a port
at the top.
WAN ports (8 to
9)
RJ45 2 10/100/1000M
autosensing
Ethernet electrical
ports, numbered
from
GigabitEthernet
0/0/8 to
GigabitEthernet
0/0/9.
The device is
connected to the
WAN or cloud
management
platform using a
network cable.
Ethernet Cable
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 30