Huawei USG6000E Series - Page 50

Port Connector Type Description Available
Components
10GE optical ports
(0 to 1)
SFP+ 2 10GE
autosensing
Ethernet optical
ports, numbered
from
XGigabitEthernet
0/0/0 to
XGigabitEthernet
0/0/1. Not
compatible with
GE optical
modules.
10Gbps SFP+
Optical Modules
WAN ports (0 to
1)
RJ45 2 10/100/1000M
autosensing
Ethernet electrical
ports, numbered
from WAN 0/0/0
to WAN 0/0/1.
The device is
connected to the
WAN or cloud
management
center using a
network cable.
Ethernet Cable
SSD card slot - The M.2 module
is inserted to
record logs and
reports in real
time. The M.2
module is
optional. You can
purchase the M.2
module as
required.
● Hard Disk
Unit M.2-
Sata64G-A
● Hard Disk
Unit M.2-
Sata240G-A
USB 3.0 port USB 3.0 Type A USB ports allow
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.
● USB ash drive
that complies
with USB 2.0
● USB ash drive
that complies
with USB 3.0
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 43