In the dual-OT scenario, connect the ground terminal on the side panel of the USG.
Figure 5-45 Connecting the ground terminal in the dual-OT scenario
The OT terminal may rotate and result in device damage. Make sure that it is
independent of the adjacent metal mechanical part or other terminals.
----End
Follow-up Procedure
Verify the following after the cabling is complete:
● The PGND cable is securely connected to the ground terminal.
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 569
To Next Page
Loading...
