EasyManua.ls Logo

Huawei USG6000E Series - Page 66

Huawei USG6000E Series
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Port Connector Type Description Available
Components
MGMT port RJ45 Out-of-band
10/100/1000M
RJ45 autosensing
Ethernet
management
port. The interface
number is METH
0/0/0 and the
default IP address
of the interface is
192.168.0.1.
You can connect
this port to the
network port or
any reachable
port on a PC
through a
network cable.
Then, you can use
Telnet to access
the CLI or use a
web browser to
access the web UI
to
congure,
manage, and
maintain the
device.
NOTE
The MGMT port
cannot be used as
a service port.
Ethernet Cable
Power Supply System
The power supply system has one PAC60S12-AR, PAC60S12-R, or PAC600S12-CB
AC power module. Two power modules can be congured for 1+1 power
redundancy.
Heat Dissipation System
The heat dissipation system uses one FAN-023A-B module to dissipate heat for
the system. From the front panel, the device provides a front-to-rear air
ow. The
fan module locates at the air exhaust of the system.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 59

Table of Contents

Other manuals for Huawei USG6000E Series

Related product manuals