Huawei USG6000E Series - Page 72

1. PWR, SYS,
USB, CLOUD,
and MicroSD
indicators
2. GE electrical
port ACT
indicator
3. GE electrical
port LINK
indicator
4. Optical port
indicator
5. RST button
Table 4-27 Indicators on the USG6530E
Silkscreen Name Color Status Description
PWR Power
indicator
Green Steady on The power
module works
properly.
- O The power
module is
faulty or the
power cable is
disconnected.
SYS System
indicator
Green Steady on The system is
being
powered on
or restarted.
Green Blink every
two seconds
(0.5 Hz)
The system is
running
normally.
Green Blink four
every second
(4 Hz)
The system is
starting.
Red Steady on A system
fault occurs.
- O The system is
not running.
USB USB indicator Green Steady on USB-based
deployment is
complete.
Green Blink four
every second
(4 Hz)
The data of
USB-based
deployment is
being read.
Red Steady on USB-based
deployment
fails.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 65