Main Balance Screen – Enable and Disable Load Roller
To enable or disable the load roller in the main balance
screen, touch the load roller on the screen to cycle
through all available options.
Main Balance Screen – Ination Station
When the operator attempts a loaded balance spin, and
if “Prompted Ination Station” is enabled in Setup, the
operator will be prompted to answer if the tire has been
inated to the manufacturer’s specication.
Main Balance Screen – Performing a Spin
During a loaded balance spin, several things occur on
the screen. First, the green Start button is replaced with
a red Stop button and the tire assembly spins in 3D
space. As soon as the balance portion of the spin is
complete,weights will appear on the screen.
During each portion of the loaded spin, the text in the
lower portion of the screen will alert the operator about
what is being measured.
After the loaded spin is complete, and if dimensions have
been entered, the 3D scene will show all information
necessary to balance the assembly including; Assembly
Force, Weight Amounts, Weight Type, and Weight
Position.
HD Elite Wheel Balancer
Page 12 of 51
To Next Page
Loading...
