Huntleigh FD1-P - 7.5 New Head Fitting and Alignment - Assembly Details; 8 a. Vascular Probe Head Assemblies Only

3355
Probe Head Replacement Procedure
Figure 2 : Vascular Probe Head Assembly
Designation of
Drive Voltage
Date Code
recorded here
7. Adjust T1 to minimise supply current.
8a.Vascular Probe Head Assemblies Only [e.g. VP8HS, VP5HS, VP4HS, VP10HS]
Refer to the Head Assembly to determine drive voltage output for the selected transmitter
impedance (see Figure 2.) Set transmitter voltage using PR1(see Figure 3).
HHeeaadd AAddaappttoorr PPCCBB
PPCCBB RReeff.. 66AAHH118855
66AAHH118855-BB
Head Adaptor PCB Ref : 6AH185
To be used with Head Assemblies:
SP-TDR HEAD - VP4HS
SP-TDR HEAD - VP5HS
SP-TDR HEAD - VP8HS
SP-TDR HEAD - VP10HS
SP-TDR HEAD - EZ8HS
SP-HEAD - OP2HSG1
SP-HEAD - OP3HSG1
SP-TDR - OP2HSB1
SP-HEAD - OP2HSB1
SP-TDR - OP3HSB1
SP-HEAD - OP3HSB1
Head Adaptor PCB Ref : 6AH185-BB
To be used with Head Assemblies:
SP-HEAD - OP2HSG2
SP-HEAD - OP3HSG2
SP-TDR - OP2HSB2
SP-HEAD - OP2HSB2
SP-TDR - OP3HSB2
SP-HEAD - OP3HSB2
SP-726222 = SP-726219
SP-726224 = SP-726218