English – 17
WARNING!
Exercise care to ensure the spring
does not fly out and cause personal
injury. Wear protective goggles.
6.1 Dismantling the chain brake
2
Activate brake tension by pulling back the knee
joint as shown in Figure 2.
3
Remove the cover by loosening the two screws as
outlined in Figure 3.
Safety equipment
6 Safety equipment
1
Release the brake by moving the kickback guard
backwards.
Loosen the bar nut and remove the clutch cover,
saw chain and bar. See Figure 1
Fig 1
Fig 2
Fig 3
Fig 4
4
Insert a screwdriver in the spring and carefully
prise upwards until the spring is released and
slides onto the screwdriver. See Figure 4.
To Next Page
Loading...
