24 – English
4
Lift off the throttle lockout and the throttle from their
attachments in the handle. See gure 26.
5
Unhook the throttle cable and the recoil spring from
their attachments. See gure 27.
6.9 Dismantling the throttle lockout,
throttle and spring
1
Release the chain brake by moving the kickback
guard backwards. Dismantle the clutch cover and
front hand guard. See the ”Dismantling the mufer”
chapter.
2
Dismantle the handle half by loosening the screws
as outlined in Figure 24.
Fig 26
Fig 27
Fig 24
Fig 25
3
Slide the stop switch off its holder as outlined in
Figure 25.
Safety equipment
To Next Page
Loading...
