• Be sure not to operate the product unless the front cover of edging body is fully
closed. Otherwise, it may cause the serious hurt.
• The equipment should be properly installed and operated based on the
instructions on this manual. If the power is turned on without unlocking the
locking device for the carriage and feeler, it may cause the damage to the
product and cause the malfunction of the product.
• Do not disassemble the product without the proper training. It may cause the
electric shock, serious hurt during the operation or cause the malfunction of the
product.
• Be sure the material of lens is matched with the job options selected in the
display before starting the edging mode. Otherwise, it may cause the damage
to the wheel and shorten the lifetime of wheel.
• The safety beveling for glass lenses should be performed both at front and rear
side. Otherwise, it will cause the damage to the human skin.
• The product should be properly installed and maintained at the horizontally
leveled place. Otherwise, it may affect the normal operation of the product.
• Do not force on the stylus of frame reader. It may cause the malfunction of the
product.
• Be sure that the stylus of frame reader is not interfered with the human body or
other objects during the operation. Otherwise, it may cause the hurt or
malfunction of the product.
• Be sure that the fingers are not caught during clamping.
To Next Page
Loading...
