• In case of detaching the lens adapter from the finished lens, use the Adapter
Remover supplied as the standard accessory. Do not pull out the lens adapter
with bare hands.
• Be sure that the water supply hose is not folded or interfered with other objects
causing the problem of water supply. It may deteriorate the quality of lens
finishing. The debris of lens may cause the damage to the respiratory organ of
operator and malfunction of the product.
• The water entry should be closed every day.
• When moving the equipment, first fix the stage and check whether the power
supply is off. Then, two persons should lift the bottom of the product with both
hands.
• In case of setting down the equipment, make sure not to be interfered with the
obstacles. Setting down the product slowly in order to prevent the hurt of human
body or damage to the product.
• When moving the equipment, make sure the locking device and the screw for
the cover are properly tightened.
• In case of packaging the equipment, use the recommended packaging material
and method in order to prevent the damage during the transportation.