• Be sure to use the standard accessories or tools provided together with the
product for the maintenance. Otherwise, it may cause the malfunction of the
product.
• In case of wheel dressing, be sure to use the dressing stick fitted with each
wheel. The dressing stick should be replaced in case the length becomes
smaller than the size, which can be hold by hand.
• Make sure that the power cord is the correct type that is required in your area.
This Device has a universal power supply that allows operation in either 100-
120 Vac or 200-240 Vac voltage areas (no user adjustment is required).
• Power Cord Requirements :
For 100-120 Vac use
- UL style SV, SVT, SJ or SJT, 18AWG, 3 conductor
- One end with NEMA 5-15P min. 10A, 125V
- Other end IEC 60320 C13 max. 3 m long
For 200-240 Vac use - Plug end
- Cable H05VV-F 3G, min. 1.0 mm2
- Other end (with appliance coupler connected to unit IEC 60320 C13),
3 m long
- CEBEC, DEMKO, KEMA, NEMKO, OVE, SEMKO, VDE, UTE, FEMKO
- Conductor Colors – brown, blue, green/yellow stripe
To Next Page
Loading...
