• Only Binocular PD and FPD-based OH are available in One-Stop Edging Mode.
• User Selections of Polishing Option are not available in One-Stop Edging Mode.
The followings are automatically applied.
- Beveling : No Polishing
- Grooving (Semi-Rimless) : with Polishing
- Flat Edging (Rimless) : with Polishing
• During using One-Stop Edging Mode, if you need to use advanced functions,
finish the One-Stop Edging Mode and then go into basic edging mode. The
applied values and options are still available.
To Next Page
Loading...
