133
7. Alarm List
Alarm
No.
Alarm Picture Cause Action
21A
CNC working mode changed and
now not auto mode when bar feeder
auto cycle.
CNC working mode
changed, bar feeder will
wait CNC auto mode to
continue .
Change CNC working mode
to auto mode
22
While auto cycle somebody opened
bar feeder cover.
Somebody opened the
cover and stopped auto
cycle.
Close the cover.
Start auto cycle again.
23
While auto cycle, bar feeder was
moved, sliding rail unlocked.
Somebody moved the
bar feeder and stopped
auto cycle.
Move bar feeder to sliding
rail locked position.
Start auto cycle again.
To Next Page
Loading...
