Hydrafeed MSV 65 - Page 140

137
7. Alarm List
Alarm
No.
Alarm Picture Cause Action
33
Proximity switch detecting before
pushrod or flag retracting back.
(1) Metal scrap on the
surface of switch.
(2) Damaged switch.
(1) Cleanse the surface of
switch
(2) Replace switch.
Item1: proximity switch
See11-1
Drawing NO : S04803-000X
34
Bar too short
Bar length shorter than
length F
(part off position )
minus S( spindle length)
-Reset part off position.
-Change a longer bar
35
Please close the chuck
Bar feeder checked the
bar inside of spindle.
Somebody pressed CNC
chuck open .
(when you select chuck
close bar check)
-Touch on <NEXT>.
-Close the chuck.