Hypertherm XPR170 - Air Hose (Black); Argon (VWI or Optimix Only) (Black); F5 (VWI or Optimix Only) (Red); Hydrogen (Optimix Only) (Red)

Installation
3
98 810060 Instruction Manual XPR170
Oxygen hose (blue)
Nitrogen hose (black)
Air hose (black)
Hydrogen (OptiMix only) (red)
Argon (VWI or OptiMix only) (black)
F5 (VWI or OptiMix only) (red)
Shield water (VWI or OptiMix only) (blue)
Use a hand-over-hand motion to uncoil the hoses, cables, and
leads. As you uncoil them, position the flat portion on the floor.
To avoid equipment damage, do not pull from one end of the
hose, cable, or lead to uncoil it. Pulling from one end can cause
damage.