[Schedule mode]
Select the schedule operation.
Off: Do not perform the schedule operation.
Alarm permission (Terminal alarm 1,2,3): Allow the terminal to input an alarm during the
set range of the schedule.
Alarm permission (Terminal alarm 1): Allow Terminal 1 to input an alarm during the set
range of the schedule.
Alarm permission (Terminal alarm 2): Allow Terminal 2 to input an alarm during the set
range of the schedule.
Alarm permission (Terminal alarm 3): Allow Terminal 3 to input an alarm during the set
range of the schedule.
VMD permission: Allow VMD during the set range of the schedule.
Preset position: 1 to Preset position: 8: After the time is set for the schedule, it moves to
the position selected from the preset position
registered in advance.
[Schedule]
Check the boxes for the day you want to set the schedule range. Set the start time and the
end time when you want to specify a time period. Check "24 h" when the time period is not
[Setup via recorder's main monitor]
58
To Next Page
Loading...
Need help?
General
