4.3 Setting/adjustment of operating conditions (AVD)
4-10
4. Operation
Touch the [Pressing force] and [Press starting point] buttons.
Ten Key window will open.
After setting the numerical value, touch the [ENT] key.
The screen will switch to the Simple Data Setting window.
Touch the [Transfer] key.
The numerical values will
be written to the controller.
The [BEnd] button and
[FEnd] button will
turn green.
Press the [FEnd] or [BEnd] buttons to operate.
Check the results of the new setting/adjustment.
3
Action
2
Action
Action
4
5
To Next Page
Loading...
