The Cursor moves to the appropriate step No. Press
the return key.
Input commands.
Commands are displayed in the function key area.
How to search the command
① When the cursor is located at commands input
locations, commands are displayed in
alphabetical order by pressing SF key.
② Alphabets are allocated on 10 keys. (ex. GHI are
allocated to 9.) When the cursor is located at
command input location, display the first
command word which starts with each alphabet in
the function key area each time by pressing the
10 key.
Display the command you’d like to input in the
function key area with the steps of ① and ②
above and press the corresponding function key.
How to search the command, HOME
The commands which start with G, H, or I will be
displayed by pressing the 9 key of the 10 keys.
(Some commands can’t be displayed by pressing
one of the 10 keys. In this case, press the SF (shift)
key and one of the 10 keys for more option.)
Display HOME in the function key area and press
the F4 key (HOME). (If you want to backspace
previous operation, press BS key.)
Press the return key.
The command which
starts from G
The command
which starts
from H
The command
which starts
from I
31
To Next Page
Loading...
