16-5. Memory Clear
Zero clears the global variable.
Select the F4(MClr) key on the controller item screen.
Mode Transition:
Press the F1 (Gvar) key.
To clear memory, press the F1 (Yes) key.
If not, press the F2 (No) key. The screen returns to
the previous screen.
Returns to the previous screen with the ESC key.
16-6. Re-Connection
Re-connect to the controller. In a communicable state, the off-line mode can be moved to the
on-line mode.
Select the F1(Cnct) key on the controller item screen.
Mode Transition:
To re-connect, press the F1 (Yes) key.
If not, press the F2 (No) key. It will return to the
previous screen.
During re-connection, “Please wait...” blinks.
After a re-connection completes, it returns to the
mode selection screen.
109
To Next Page
Loading...
