Supplement
Program edit prohibition error while running. Editing operation cannot be performed for the running program. Exit from
the program first.
Excessive number of symbol definitions.
Absolute encoder multi-rotation data reset prohibition error at servo ON time.
Received data string error (TP). The received data has an error. When it is not eliminated even through re-connection,
contact the manufacturer.
IAI protocol send data header logic error
IAI protocol send data command ID logic error
IAI protocol receive data error
IAI protocol response time-out error
Overrun error (in Master mode)
Framing error (in Master mode)
Parity error (in Master mode)
SCI send queue overflow (in Master mode)
SCI receive queue overflow (in Master mode)
IAI protocol send buffer overflow
IAI protocol receive buffer overflow (in Master mode)
IAI protocol send queue overflow
IAI protocol receive queue overflow
Controller no connection error. Communications cannot be established or an unsupported controller is connected.
Can not edit while running program (TP)
Too many Symbol Definitions
Can not reset M-Dat when servo is ON.
Receive Data Invalid
Header Logic Error (IAI Protocol Send)
Command ID Logic Err (IAI Protocol Send)
Receive Data Error (IAI Protocol Recv)
Response Time-out (IAI Protocol Recv)
Overrun Error (Master Mode)
Framing Error (Master Mode)
Parity Error (Master Mode)
Send Que Overflow (Master Mode)
Receive Que Overflow (Master Mode)
Send Buffer Overflow (IAI Protocol Send)
Receive Buffer Overflow (Master Mode)
Send Que Overflow (IAI Protocol Send)
Receive Que Overflow (IAI Protocol Recv)
CTL Not Connected
9ED
9EE
9EF
DE0
DE1
DE2
DE3
DE4
DE5
DE6
DE7
DE8
DE9
DEA
DEB
DEC
DED
DEE
130
To Next Page
Loading...
Need help?
General
