11-5. Position Data: Clear
The following operating instructions are to clear the position data.
Select the F1 (Edit) key on the mode selection
screen.
Select the F1 (Posi) key.
Select the F4 (Clr) key.
Input the first No. and the last No. of the position
data to clear by using the 10 keys and press the
return key.
To clear the selected position data, press the F3 (Clr)
key.
To clear the data for all positions (No. 1 through No.
3000), press the F4 (AClr) key.
Return to the previous screen.
To write to Flash ROM, press the ESC key several
times to return to the Flash ROM writing screen.
Position data to clear
First No.
Last No.
65
To Next Page
Loading...
Need help?
General
