16-3. Software Reset
Executes software reset of the controller. The data which is not written to Flash ROM will be
cleared.
Select the F2 (SRst) key on the controller item screen.
Mode Transition:
To execute a software reset, press the F1 (Yes) key.
If not, press the F2 (No) key. The screen returns to
the mode selection screen.
16-4. Error Reset
Executes error reset of the controller. Reset the message-level and action-release-level errors. If
the cause of the error is not solved, the error will reoccur again.
Select the F3 (ERst) key on the controller item screen.
Mode Transition:
To execute an error reset, press the F1 (Yes) key.
If not, press the F2 (No) key.
The screen returns to the controller item screen.
108
To Next Page
Loading...
