Input 1 on position No. and press the return key.
Transmit the data to the controller by pressing the
WRT key.
The cursor moves to step No.4.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting
the data, the input data will be invalid.
Input MOVL 2 ~ MOVL 6 program data into steps
No. 4~8 by the same procedure and transmit the
data to the controller.
Display EXIT in the function key area by using the 8
and SF keys.
Select the F2 key (EXIT) and press the return key.
34
To Next Page
Loading...
