IBM Aspera HST

| Asconfigurator Reference | 317
Values: (Number 0-255)
transfer_out_bandwidth_aggregate_trunk_id
The ID of the Vlink to apply to outgoing transfers. A value of 0 disables the Vlink.
Values: (Number 0-255)
transfer_in_bandwidth_flow_target_rate_cap
The maximum value to which the target rate for incoming transfers can be set.
Values: (Number)
transfer_out_bandwidth_flow_target_rate_cap
The maximum value to which the target rate for outgoing transfers can be set (in Kbps).
Values: (Number)
transfer_in_bandwidth_flow_target_rate_default
The default value to which the target rate for incoming transfers is set (in Kbps).
Values: (Number)
transfer_out_bandwidth_flow_target_rate_default
The default value to which the target rate for outgoing transfers is set (in Kbps).
Values: (Number)
transfer_in_bandwidth_flow_target_rate_lock
A value of false allows users to adjust the transfer rate for incoming transfers. A value of true
prevents users from adjusting the transfer rate for incoming transfers.
Values: false (default), true
transfer_out_bandwidth_flow_target_rate_lock
A value of false allows users to adjust the transfer rate for outgoing transfers. A value of true
prevents users from adjusting the transfer rate for outgoing transfers.
Values: false (default), true
transfer_in_bandwidth_flow_min_rate_cap
The maximum value to which the minimum rate for incoming transfers can be set (in Kbps).
Transfers cannot go slower than the minimum rate.
Values: (Number)
transfer_out_bandwidth_flow_min_rate_cap
The maximum value to which the minimum rate for outgoing transfers can be set (in Kbps).
Transfers cannot go slower than the minimum rate.
Values: (Number)
transfer_in_bandwidth_flow_min_rate_default
The default value to which the minimum rate for incoming transfers is set (in Kbps). Transfers
cannot go slower than the minimum rate.
Values: (Number)
transfer_out_bandwidth_flow_min_rate_default
The default value to which the minimum rate for outgoing transfers is set (in Kbps). Transfers
cannot go slower than the minimum rate.
Values: (Number)
transfer_in_bandwidth_flow_min_rate_lock
A value of false allows users to adjust the minimum rate for incoming transfers. A value of true
prevents users from adjusting the minimum rate for incoming transfers.