IBM DS3500

Storage subsystem and controller information record
Table 16 provides a data sheet for recording storage subsystem names,
management types, Ethernet hardware addresses, and IP addresses. Make a copy
of this table and complete the information for your storage subsystems and
controllers. Use the information to set up the BOOTP table for the network server
and the host or Domain Name System (DNS) table. The information is also helpful
if you add storage subsystems after initial installation. See the DS Storage Manager
documentation for detailed instructions for obtaining the information. For a sample
information record, see Table 17 on page 144.
Table 16. Storage subsystem and controller information record
Storage
subsystem
name
Management
method
Controller Ethernet and IP
addresses, and host name
Host IP
address and
host name
Controller A Controller B
Appendix A. Records 143