IBM Storwize V7000 Unified Series - Originating File Module and File Module Specific Hardware Code - Code 0, 2, 4; Originating File Module Specific Software Code - Code; Storage Enclosure Hardware Code - Code

Table 28. Originating file module and file module specific hardware code – Code 0, 2,
4 (continued)
C = Originating specific hardware code in sequence ABBC-DDDD
Code Device
C Fibre channel adapter 2 (both ports) – Storage node only
D Bonded device (data0 mgmt0)
E System x internal hard disk drives
Table 29. Originating file module specific software code – Code 1, 3, 5
C = Originating specific software code in sequence ABBC-DDDD
Code Device
0 Red Hat Linux
1 GPFS
2 CIFS server
3 CTDB
4 SoFS
5 winbind
6 multipathd
7 nscd
8 sshd
9 httpd
A vsftpd
B nmbd
C nfsd
D cpu
E multipath/disk
Table 30. Storage enclosure hardware code – Code 6
C = Originating specific software code in sequence ABBC-DDDD
Code Device
0 Generic value for storage enclosure hardware
1 Disk drive in controller drawer
2 RAID controller card 0
3 RAID controller card 1
4 Power supply in controller drawer
5 RAID array/LUN issue in controller drawer
6 Disk drive in expansion drawer
7 Expansion fibre channel card 0
8 Expansion fibre channel card 1
9 Power supply in expansion drawer
A RAID array/LUN issue in expansion drawer
78 Storwize V7000 Unified: Problem Determination Guide Version