Table 6. Error messages and actions (continued)
Error code Error message Action key
0B9D Internal error setting permissions on NAS private
key file.
A
0B9E No NAS private key file found. Verify that the
Storwize V7000 configuration ran properly.
F
0B9F Unable to find local serial number in new nodes. B
0BA0 Unable to find node at new IP address. Check the
node cabling.
C
0BA1 Remote node is at a higher code level. E
0BA2 Management IP for node not found. D
0BA3 The disk IP was not found in VPD. D
0BA4 Unable to attach to Storwize V7000 system. Private
key files might not match.
F then G
0BA5 Unable to add Storwize V7000 system to CLI. A
0BA6 The addstoragesystem CLI command has failed. G
0BAC Unable to find remote serial number in newnodes. C then D then B
0BAD Remote node is at a higher code level. E
0BAE Incorrect parameters. A
0BAF Unable retrieve the node serial number. A
0BB0 Unable to open pxeboot data file. A
0BB1 Unable to update pxeboot data file for node. A
0BB2 Unable to set file permissions. A
0BB3 Unable to find node serial in pxeboot data file. A
0BB4 Node had an internal error during configuration. A
0BC6 Unable to configure system. A
0BC9 Invalid arguments passed to the script. A
01B2 Unable to start performance collection daemon. Contact your next
level of support.
01B3 Failed to copy upgrade package to Storwize V7000
system.
H then G
01B4 Failed to start upgrade on Storwize V7000 with the
svctask applysoftware command.
H then G
01B5 Storwize V7000 multipaths are unhealthy. H then G
01B6 Storwize V7000 volumes are unhealthy as indicated
using the lsvdisk command.
Check Fibre Channel
cabling to storage and
verify storage is up.
01B7 Failed to query status of upgrade by using the
lssoftwareupgradestatus command.
H then G
01B9 Failed to check the Storwize V7000 version H
01B8 Failed to query status of Storwize V7000 nodes using
the lsnodes command.
H
18 Storwize V7000 Unified: Problem Determination Guide Version
To Next Page
Loading...
Need help?
General
