Table 23. SMART ASC/ASCQ error codes and messages (continued)
ASC ASCQ Description
26 0A UNEXPECTED INEXACT SEGMENT
26 0B INLINE DATA LENGTH EXCEEDED
26 0C INVALID OPERATION FOR COPY SOURCE OR DESTINATION
26 0D COPY SEGMENT GRANULARITY VIOLATION
26 0E INVALID PARAMETER WHILE PORT IS ENABLED
27 00 WRITE PROTECTED
27 01 HARDWARE WRITE PROTECTED
27 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED
27 07 SPACE ALLOCATION FAILED WRITE PROTECT
28 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE
CHANGED
28 01 IMPORT OR EXPORT ELEMENT ACCESSED
29 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
29 01 POWER ON OCCURRED
29 02 SCSI BUS RESET OCCURRED
29 03 BUS DEVICE RESET FUNCTION OCCURRED
29 04 DEVICE INTERNAL RESET
29 05 TRANSCEIVER MODE CHANGED TO SINGLE-ENDED
29 06 TRANSCEIVER MODE CHANGED TO LVD
29 07 I_T NEXUS LOSS OCCURRED
2A 00 PARAMETERS CHANGED
2A 01 MODE PARAMETERS CHANGED
2A 02 LOG PARAMETERS CHANGED
2A 03 RESERVATIONS PREEMPTED
2A 04 RESERVATIONS RELEASED
2A 05 REGISTRATIONS PREEMPTED
2A 06 ASYMMETRIC ACCESS STATE CHANGED
2A 07 IMPLICIT ASYMMETRIC ACCESS STATE TRANSITION FAILED
2A 08 PRIORITY CHANGED
2A 09 CAPACITY DATA HAS CHANGED
2A 0A ERROR HISTORY I_T NEXUS CLEARED
2A 0B ERROR HISTORY SNAPSHOT RELEASED
2A 10 TIMESTAMP CHANGED
2A 14 SA CREATION CAPABILITIES DATA HAS CHANGED
2B 00 COPY CANNOT EXECUTE SINCE HOST CANNOT DISCONNECT
2C 00 COMMAND SEQUENCE ERROR
2C 05 ILLEGAL POWER CONDITION REQUEST
2C 07 PREVIOUS BUSY STATUS
2C 08 PREVIOUS TASK SET FULL STATUS
2C 09 PREVIOUS RESERVATION CONFLICT STATUS
Chapter 4. File module 69
To Next Page
Loading...
Need help?
General
