360 GeHing ERAP Reports
The error recording analysis procedure (ERAP) gets, formats, and displays
or
prints error statistical
information. There are four methods
of
getting ERAP reports:
• The ERAP procedure under SSP lets you get system summary reports and detailed device reports from
the system error log.
• The test request procedure (TESTREQ) under SSP lets you get ERAP reports associated with work
stations and communications devices.
• The Test Request function key
of
any local
or
remote work station lets you get ERAP reports associated
with work stations and communications devices.
• A system test (SYSTEST) option lets you get system summary reports and detailed device reports from
the system error log.
To Get ERAP Reports under SSP
1.
Enter ERAP.
2.
Select the type
of
ERAP report.
3.
Select the option to display or print the ERAP report.
To Get ERAP Reports Using the Test Request Procedure
1.
Enter TESTREQ.
2.
Select the ERAP option.
3.
Select the type
of
ERAP report.
To Get ERAP Reports Using the Work Station Test Request Key
This procedure assumes that you have a sign-on display but have not signed on a work station.
1.
Press the Cmd key
and
the Test Request function key (backspace key).
2.
Select the ERAP option.
3.
Select the type
of
ERAP report.
To Get ERAP Reports When Running the System Test
1.
Press the Attn key.
2.
Select option 4 (Set Inquiry Condition for Program) from the Inquiry menu.
3.
Select the option that starts ERAP.
4.
Select the
ERAP
reports you want.
S.
Use the Cmd7 key to return to SYSTEST.
3-24
5363
Maintenance Information
To Next Page
Loading...
Need help?
General