Table 51. Feature codes for the models of the TS3500 Tape Library (continued)
Feature Code Model CSU Description
9977 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 15 A, with Earth Pin InMetro NBR
14136 plug. This power cord is for Brazil.
9978 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 10 A, with AS/NZS 3112/2000 plug.
This power cord is for Australia and New
Zealand.
9979 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 15 A, with JIS C8303, C8306 plug. This
power cord is for Japan.
9980 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 10 A, with GB 2099.1, 1002 plug. This
power cord is for China.
9981 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 15 A, with earth pin KS C8305,
K60884-1 plug. This power cord is for Korea.
9982 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 10 A, with CNS 10917-3 plug. This
power cord is for Taiwan.
9983 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 16 A, with SANS 164-1 plug. This
power cord is for South Africa.
9984 L23, D23, L53, D53 No NEMA L6/20P. Dual 4.3 m (14 ft.) 250 V ac, 15A
single phase line cord assemblies with NEMA
L6-20P non-watertight twistlock 20A plugs. UL /
CSA certified for use in US and Canada. Mates
with customer-supplied NEMA L6-20R
receptacles.
9985 L23, D23, L53, D53 No Watertight 15A/250V Russellstoll. Dual 4.3 m (14
ft.) 250 V ac, 15A single phase line cord
assemblies with watertight 15A Russellstoll plugs
(RS p/n 3720DPU2). UL / CSA certified for use
in US and Canada. Mates with
customer-supplied Russellstoll 3743U2 or
9R23U2W receptacles.
9989 L23, D23, L53, D53 No Dual power cords, non-watertight, 4.3 m (14 ft.),
250 V ac, 10 A, with IEC 309 C14 plugs. These
power cords are for use with adjacent frame
PDUs (FC 1950) or external (customer-supplied)
PDUs.
Notes:
1. The Full Capacity Storage feature (FC 1644) is required to attach the optional
expansion frame Models D22, D32, or D52.
2. The Full Capacity Storage feature (FC 1644) is required to add an Additional
I/O Slots feature (FC 1658 or FC 1659).
3. With feature code 1451, feature codes 1660 and 1662 are standard in Models
L22, L23, L52, L53, D23, and D53.
4. Required when you have 3 to 16 frames and you want to remove frames such
that 1 or 2 frames remain. This requirement does not apply to a library that
contains dual accessors.
142 IBM System Storage TS3500 Tape Library with ALMS: Introduction and Planning Guide
To Next Page
Loading...
Need help?
General
