Ensure proper packaging of Ultrium tape cartridges
Adhere to the following guidelines when packaging or shipping Ultrium tape
cartridges:
v When you ship a cartridge, ship it in its original or better packaging.
v Always ship or store a cartridge in a jewel case.
v Use only a recommended shipping container that securely holds the cartridge in
its jewel case during transportation. Ultrium Turtle Cases (by Perm-A-Store)
have been tested and found to be satisfactory (see Figure 38). They are available
at http://www.turtlecase.com.
v Never ship a cartridge in a commercial shipping envelope. Always place it in a
box or package.
v If you ship the cartridge in a cardboard box or a box of a sturdy material, ensure
the following:
– Place the cartridge in polyethylene plastic wrap or bags to protect it from
dust, moisture, and other contaminants.
– Pack the cartridge snugly to ensure that it does not move around.
– Double-box the cartridge (place it inside a box, then place that box inside the
shipping box) and add padding between the two boxes (see Figure 39 on page
157).
Figure 38. Tape cartridges in a Turtle Case
156 IBM System Storage TS3500 Tape Library with ALMS: Introduction and Planning Guide
To Next Page
Loading...
Need help?
General
