5. To rewind the tape, insert the cartridge manual rewind tool (see 1 in
Figure 58) into the cartridge's hub 2 and turn it clockwise until the tape
becomes taut.
6. Remove the rewind tool by pulling it away from the cartridge.
a14m0111
1
2
3
Figure 57. Placing the dislodged leader pin into the correct position.. The cartridge door is open, showing the leader
pin out of position
a14m0112
1
2
Figure 58. Rewinding the tape into the cartridge
Chapter 5. Using 3592 tape drive media 191