816f0807-0303ffff [ProcessorElementName] has been Enabled.
Explanation: IMM has detected Processor 3 has been Enabled.
May also be shown as 816f08070303ffff or 0x816f08070303ffff
Severity: Info
Alert Category: System
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0060
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f0807-0304ffff [ProcessorElementName] has been Enabled.
Explanation: IMM has detected Processor 4 has been Enabled.
May also be shown as 816f08070304ffff or 0x816f08070304ffff
Severity: Info
Alert Category: System
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0060
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f0807-2584ffff [ProcessorElementName] has been Enabled.
Explanation: One CPU has been enabled.
May also be shown as 816f08072584ffff or 0x816f08072584ffff
Severity: Info
Alert Category: System
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0060
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
816f0807-0303ffff • 816f0807-2584ffff
Appendix B. Integrated management module error messages 1001
To Next Page
Loading...
Need help?
General