About this task
Note: You do not have to remove the top cover before you remove the bezel.
To remove the bezel, complete the following steps:
Procedure
1. Read the safety information that begins with “Safety” on page v and
“Installation guidelines” on page 97.
2. Press on the bezel retention tabs at the sides of the bezel, and pull the bezel
from the server.
3. If you are instructed to return the bezel, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Replacing the front bezel
This topic provides instructions for how to install the front bezel.
About this task
To install the bezel, align the studs with the matching holes on all four corners;
then, push in and snap the bezel into place.
Chapter 5. Removing and replacing components 109
To Next Page
Loading...
Need help?
General