EasyManua.ls Logo

IBM X3950 X5 - Page 439

IBM X3950 X5
1064 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. 4. If the Checkpoint display repeatedly blinks F:A then 6:9
7. - (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-140bffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A CPU VRD failure has occurre.
May also be shown as 80070608140bffff or 0x80070608140bffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1. Critical: Do Not attempt to power the system on, or AC cycle.
2. 1. If local, pull out the Operator Information Panel, observe and make note of what is being displayed on the
Checkpoint display for support reference.
3. 2. Using the IMM web interface, capture a 'Service Data' file (note:) for support reference.
4. 3. If the Checkpoint display repeatedly blinks F:A then 6:8.
5. - (Trained service technician only) Replace the CPU board
6. 4. If the Checkpoint display repeatedly blinks F:A then 6:9
7. - (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-140cffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A CPU VRD failure has occurre.
May also be shown as 80070608140cffff or 0x80070608140cffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1. Critical: Do Not attempt to power the system on, or AC cycle.
2. 1. If local, pull out the Operator Information Panel, observe and make note of what is being displayed on the
Checkpoint display for support reference.
3. 2. Using the IMM web interface, capture a 'Service Data' file (note:) for support reference.
4. 3. If the Checkpoint display repeatedly blinks F:A then 6:8.
5. - (Trained service technician only) Replace the CPU board
6. 4. If the Checkpoint display repeatedly blinks F:A then 6:9
7. - (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-140bffff 80070608-140cffff
Appendix B. Integrated management module error messages 423

Table of Contents

Related product manuals