806f0007-0301ffff [ProcessorElementName] has Failed with IERR.
Explanation: IMM has detected processor 1 failed - IERR condition.
May also be shown as 806f00070301ffff or 0x806f00070301ffff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0042
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and standard devices,
such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
2. Run the DSA program for the hard disk drives and other I/O devices.
3. (Trained service technician only) Replace microprocessor 1.
806f0007-0302ffff [ProcessorElementName] has Failed with IERR.
Explanation: IMM has detected processor 2 failed - IERR condition.
May also be shown as 806f00070302ffff or 0x806f00070302ffff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0042
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and standard devices,
such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
2. Run the DSA program for the hard disk drives and other I/O devices.
3. (Trained service technician only) Replace microprocessor 2.
806f0007-0301ffff • 806f0007-0302ffff
Appendix B. Integrated management module error messages 437
To Next Page
Loading...
